About this 3D model

As I develop designs to share, I try to add models from a range of ideas. This is a building that can be used as a boiler room or something similar to add extra detail to a scene.As many models don't have internal detail, I wanted this model to have internal brickwork to help enhance the look through the windows. The brickwork and roof are one part, but the doors and windows are separate items. Please refer to the photos on how I printed the parts. Windows just need some clear plastic glued to the inside surface of the glass. This item has been designed at OO gauge, 1/76.2 scale.For HO Gauge print at 87%, 1/87 Scale,For O Gauge UK print at 175%, 1/43.5 scale,For O Gauge International print at 158%, 1/48 scale,For TT120 Gauge print at 63.5%, 1/120 scale,For N Gauge UK print at 51.5%, 1/148 Scale, (Caution: I have not tested printing this in N gauge scale). The design has been tested on the Bambu Labs A1 printer. This model can be printed on either an FDM or resin printer, but for scales smaller than OO/HO, I would recommend a resin printer. As per normal with my designs, there is a balance between accuracy and printability, hopefully not affecting the look of the model too much. I printed the building with a 0.4mm nozzle with a layer height of 0.08mm, and the windows, door, and drain pipe were printed with a 0.2mm nozzle and a layer height of 0.06mm. Please check my Website, **https://sites.google.com/view/pete3dprintinghelp/home** If you like my designs, then please would you support me through my Patreon account - https://www.patreon.com/PJD1974. Any money raised helps me research, design, and develop new items for me to share. For £1 a month, you will give me basic support, and for £4 you will get insight into my new designs and be able to contribute to my future projects. If you like my content and would like to buy me a coffee to say Thank You, then please click this link https://ko-fi.com/petes3ddesigns