About this 3D model
Boost Me Love This Design? Give It a Boost, It's FREE! Boosting this design not only helps it reach more creators but also motivates me to keep crafting innovative models for the community. Your boost is a simple way to show love for 3D printing creativity, and it means the world to me! Hit that boost button and help this project thrive! ? Thank you for being part of this amazing journey! ? Phone holder designed to resemble a Recaro Racing Seat, unique and functional, great for any space. It's a top conversation starter for anyone who loves cars. Always adds a touch of car scene to your surroundings. Membership Want early access to prototypes, a full commercial license, and a say in what I design next? ➡️ [Become a member] and get monthly behind-the-scenes updates & exclusive files. Want to Bring This Project to Life? Make assembly a breeze by grabbing the Maker’s Beginner Kit through my exclusive affiliate link ! It includes all the essential non-printed parts like screws and hardware to finish this model and many others. Plus, purchasing through this link supports my work while giving you access to premium components tailored for creative builds. Wanna Sell This and Other Items? Check out my Patreon for a commercial license. patreon.com/BrandedAbstract3D To complete the phone holder you'll need: 1 x Seat (printable) 1 x Roll Cage (printable) 2 x Support Struts (printable) 8 x M3 Screws Print Settings I usually go for the BBL “Standard” 0.20mm settings. It seems to strike the right balance between quality and speed compared to other profiles. I'm a fan of the consistent layer height of 0.2mm, but variable layer height is good too! Feel free to play around with the print quality settings to see what works best for you. I've had success with BBL Filaments and various other brands, but for Silk PLA, slowing down the outer walls to around 50mm/s seems best. Seat: Use a 10% grid infill—it's sturdy enough to hold a phone. I used to two bottom shell layers; once the support struts are fitted, the seat base doesn’t touch the tabletop. And, I set the seam position to “back”. I’ve found it looks more intentional, and you kind of forget it’s there! Roll Cage: A 0% infill will save print time and is still pretty strong, even for two perimeters. Support Struts: Use a 15% grid infill. This part is mostly top and bottom shell layers, but a good scaffold is needed for the top layers to build on. Important: set the top surface to 50mm/s for a smoother finish! You could turn on ironing, but I prefer seeing some industrial layer lines. Assembly Assembly is a breeze! You'll get it from just looking at the photos. Insert the M3 screws into the holes and tighten all parts together. Avoid screws longer than 10mm to prevent them from sticking out of the holes in the roll cage. It won’t break anything, but you’ll see the backs of them protruding. Happy Printing! Buy Me A Coffee ☕ (Appreciated but absolutely not required) Disclaimer: This model is compatible with the Maker's Beginner Kit B-ZC002 . The kit includes various non-printed parts to accommodate multiple popular models. As a result, some parts may not be necessary for this specific model. If you only need to purchase the non-printed parts required for this model, please uncheck the Kit option when making your purchase.