About this 3D model

I loved Alex's design for the makita mounts, but I wanted to mount my tools on the ceiling of my shed, not on a wall. So, I modified his mounts (leaving the mounting holes and the “drill” text, because… why not?) to support the rafters. The mounts attach with pressure by clipping on to the fold in the shed. For this reason, there is an “inverted” version, so you can put them on the right or left side, whichever you want. You should also add 2 screws, the holes for which are already built into the model, and which align with the holes in the rafters… though you can also drill your own holes or use self-drilling screws. Don't over-tighten! I strongly suggest printing in ASA, ABS, Nylon, or other high-temp filament. The roof of your shed gets VERY hot when it's in the sun, and the plastic will soften and drop your tools to the ground if you print these in PLA. ASA or other high-temp filament 4 Perimeters 40%+ Infill Place the angled side down No supports needed This item was featured in my popular YouTube video: