About this 3D model

A case for fitting the Raspberry Pi4 with Sonoff Zigbee V3 Stick . Needs: 4x Brass Inserts M3 x D4,6 x L3,0 4x Brass Inserts M3 x D4,6 x L5,6 4x BHS 3x6mm 4x ISO 7380-1 3x8mm Build should be selfexplaining, but: The 4 shorter Brass inserts in the Holes in the Raspi-Baseplate. 2 of the 5,6 Brass inserts in the top of the Base-Stand and 2 in the sides. At first fix the Raspi-Baseplate to the Base-Stand with help of the 2 ISO 7380-1 3x8mm screws, than fix the Raspi with the 4 BHS3x6mm screws to the Raspi-Baseplate. Put the cover on an fix it with the last 2 ISO 7380-1 3x8mm to the Base-Stand.