About this 3D model

Toothless Grinder v1.2 Experience faster, more efficient grinding with our innovative toothless design. Key Features: Toothless Design: Unlike traditional grinders, our simple blade pattern effortlessly crushes your herbs quicker and better than any tooth grinder. Multi-Chamber System: Enjoy perfectly sized chunks that drop directly into the collection chamber at the bottom. MAG or MAG-Free Options: Choose between two sets of grinding blades (separate plates). The MAG version utilizes 4x2mm round magnets -=LINK=- , while the NON-MAG version offers a magnet-free design for simplicity. Simple Assembly: No glue is needed for most parts—everything snaps into place. Only the magnet (for the MAG version) requires glue. Printing Preferences: Blades: Layer Height: 0.08mm or 0.12mm Initial Layer: Single wall Ironing: Top surface for a smooth finish Infill: 25% Gyroid Walls: 3 Adhesion: Use 3DLAC Glue or a glue stick to eliminate first layer adhesion issues Case: Layer Height: 0.2mm Infill: 15% Gyroid Walls: 3 Ironing: Top surface only for the bottom case component to achieve a smooth finish v1.2 Update: Enhanced Print Quality: All models now feature a higher polygon count to increase print quality. Two Blade Versions: Blades are now available in two versions—one with a slot to fit a 4x2mm magnet and another magnet-free version. Optimized Design: The top shell and inner tube are now combined into a single part to reduce space usage on the build plate. Improved Clearance: The clearance between the middle part of the case and the inner tube has been increased, eliminating the tight seal and reducing friction during grinding. Mirrored Top Blades: The top blades are now mirrored, enhancing overlap and improving herb grinding efficiency.