About this 3D model

Whilst watching the extended trailer for "Crisis on Earth-X" the 4 show, 2 night crossover event for the CW's superhero show, I noticed that Oliver, the Green Arrow shot an arrow that shed a casing to reveal what appeared to be a Kryptonite arrowhead. So with a screen grab in hand, a few arrows of my own, some callipers and a copy of Fusion 360, I set out to design a version of this arrow as best I could. I am not a designer, aside from this, I have only ever designed very simple stuff in Fusion 360, and this was by far the most challenging, but I did it. My Idea for this is to be printed with my Translucent Green PETG from Real Filaments, I chose PETG over PLA for a few reasons. 1) Layer adhesion is better on PETG 2) I have had better experiences with impact resistance. 3) I haven't found any PLA's with a translucent green that I like as much as this PETG. I Haven't gotten around to printing this yet, I am without a printer for a week or two whilst I wait for spare parts. But Ideally, as little infil as you can, to give the transparency effect as much of a chance as possible. So for my own printer (when it's fixed) I'm going to be printing 2 versions of this, a Draft print at 200 microns and 0% infil, and a 100 micron 0% version and 3 perimeters. I'll update this post with Photos once I am able to print it. *UPDATE a friend of mine was able to print this in translucent Green PLA, and it looks pretty damn awesome If I do say so myself.*