About this 3D model

Summary This monster is an adapter to attach 3 festool D27 hoses to one port. The port has a diameter of 45 mm which will fit the D36 vacuum adapter among others. The three D27 hoses are attached with retainers that have a left handed thread and a snap ring that locks into the slots in the adapter. The retainers used are slightly shorter than the original Festool, but the snap rings are the same dimensions. I use it to provide suction at the three dust ports on my Dewalt DW707 miter saw. Check out my profile, I have other Festool hose adapters as well. Print Settings Resolution: 0.2 Infill: 50 Filament: Generic TPU, ABS/ASA Notes: I printed at 0.2 mm layer height. The first 140 layers in TPU so get a flexible dust port, then switched to ABS to get a stiffer print at the top. The central pillar acts as support and is broken of after printing.