About this 3D model

A 3D printed replica of the shape that Star Butterfly's wand takes when is held by Marco during the third season of Star vs the forces of Evil. Instructions:Download the STL files and print them with the following settings Blade.stl: 0.15mm layer height, 15% infill, No supports Jewel.stl: 0.10mm layer hieght, 10% infill, No supports FaceA.stl: 0.30mm layer height, 25% infill, Supports enabled FaceB.stl: 0.30mm layer height, 25% infill, Supports enabled Cover.stl: 0.30mm layer height, 25% infill, Supports enabled Wing.stl (2 times): 0.30mm layer height, 20% infill, No supports OrbA.stl: 0.30mm layer height, 25% infill, Supports enabled OrbB.stl: 0.30mm layer height, 25% infill, Supports enabled OrbPin.stl (2 times): 0.20mm layer height, 50% infill, No supports UprCap.stl: 0.30mm layer height, 30% infill, No supports Rod.stl (2 times): 0.30mm layer height, 50% infill, No supports RodPin.stl (2 times): 0.20mm layer height, 50% infill, No supports LwrCap.stl: 0.30mm layer height, 30% infill, Supports enabled TipA.stl: 0.10mm layer height, 25% infill, No supports TipB.stl: 0.10mm layer height, 25% infill, No supports After all the pieces have been printed, assemble them following the diagram. I suggest to use superglue (cyanoacrylate) to hold them together. The parts can be painted easily using acrylic paint. I made an Imgur album showing the assembly process!