About this 3D model

I made this after buying a echo dot 5th gen with clock. My old mounts would have the echo's face downwards allowing for easy access to the buttons but with this model that wasn't going to work, instead of buying a new mount I decided to make one. this features slots at the bottom so the LED ring can shine through Pass-Through Install M4.5 (5/32in) screws are recommended for mounting. 20mm(3/4in) length should be plenty depending on your anchoring system. If your anchor requires the screw to go further in to fully engage, purchase new ones and add 10mm(3/8in) from your original screw length. Plate install Use double sided tape or epoxy to install this version.