About this 3D model

This model is meant to be a sled for the Featherweight Altimeters Blue Raven , Power Perch , & GPS Tracker (links below) that can easily be removed from your rocket with all components still attached. It is designed to use the same hardware sizes as what ships with the Featherweight components and the wood “flap” is the one provided by the Power Perch kit. I have been using PLA to print these and have yet to have any issues. Items needed Featherweight Altimeters Raven Altimeter (Blue Raven shown in photos) https://www.featherweightaltimeters.com/blue-raven-altimeter.html Featherweight Altimeters Power Perch https://www.featherweightaltimeters.com/store/p5/Power_Perch.html Featherweight Altimeters GPS Tracker https://www.featherweightaltimeters.com/featherweight-gps-tracker.html Potentially useful items #4 Washers https://www.mcmaster.com/catalog/98017A610 #4-40 Screws https://www.mcmaster.com/catalog/91772A115 #4-40 Nuts https://www.mcmaster.com/catalog/91841A005 Nylon Spacers https://www.mcmaster.com/catalog/94639A200 Use is at the discretion of the downloader, I am not responsible for any damage or injury this model may cause.