About this 3D model

The original wheel for the drying rack got burned during reparations. So I made a new one.To print this you need:1 x pin1 x rod1 x shell2 x wheel Assembly Update:The hole inside the shell (v2) and pin (v2) are made bigger so a thicker scew (4mm x 25mm) can be added for added strength. After printing all parts:You need to put the rod through the hole of the shell and glue the wheels to each side of the rod with some super glue.And a screw (2.5mm x 20mm) needs to be added at the bottom of the shell that goes into the pin to get a rotation motion of the wheel.