About this 3D model

After posting my first remix, the XBox Controller - Starfield Edition , I realized that others might want different games shown instead of the one I made. So I redesigned the model by placing a couple of voids in the middle of the stands, allowing you the ability to place your own badges on your stand. There are controller bases for Xbox (2 types), PlayStation 5 (2 types), PlayStation 4, and the Switch Pro Controller. Stand Print Settings: No rafts. No supports. Layer Height: 0.1 - 0.2mm Badges: No rafts. Some require support; check for overhangs. Layer Height: I'd recommend a .2 nozzle, or at the very least, a .4 nozzle set to .08 printing. Checkout: Make sure to check out the Magnetic Storage Base for the PS5 Controller made by jpbear09. Make your own: If you want to make your own badges, I have included blanks, so all you need to do is place your favorite logo on them. (Thanks to Gummibjorn for the idea!) To make a logo, you can find or create a PNG file and then use a website such as convertio to convert them to the SVG format, which you can then import into your slicer (if supported). They should be the following dimensions: X: 39.96 Y: 39.96 Z: 10+ I have also included a pin to help push out any stubborn badges. Printing it as an STL may require support. Notes: There appears to be what looks like a crack that appears in the switch STL version. I looked at it a,nd it appears when I import the original model into tinkeTinkercadrcad. I'll notify the author and see if they have any ideas. I am printing another copy of the base to see if it appears. Thanks again to Gummibjorn for notifying me about this.