About this 3D model

I wanted to store my Bambu Lab build plates on my ARC-PEGLAGO panels for my P1P so I created this. Build plates are oriented with the cleaning tab facing down. This model has five slots but I've included the Fusion 360 source so it's easy to add/remove slots if you need something other than five. To attach the holder to the Skadis panel I used the excellent Skadis T-Nuts Mounting System . I've provided both the original M2 T-nuts and my own remix that uses heat set inserts. You will need to print the plate holders and four of the T-nuts of your choosing. Required hardware (4) M2 x 12-14mm socket head screws (4) M2 nuts (if using the M2 nut version of the T-nuts) (4) M2 x 3.0mm L x 3.6mm OD or (4) M2 x 4.0mm L x 3.6mm OD heat set inserts (if using the heat set version of the T-nuts) Printing tips Print the STLs as they are oriented. Tree supports are required. Any layer height should work but I used 0.20mm. Updates 2023-06-01: I needed to hold more plates so I added an 8 plate version.