About this 3D model

Intro This model is a simple holder for shafted tools of some sort. It is meant to attach to the Honeycomb Storage Wall . It can be highly customized to whatever your needs are. Three example models have been included. Dependencies This model requires the Updated OpenSCAD library for HSW attachments which you can find here: https://www.printables.com/model/542305-updated-openscad-library-for-hsw-attachments Parameters Parameters include the number and spacing of holes, the number and spacing of inserts, hole diameter, etc. Here is a table: blockDepth This specifies in mm how deep the shelf should be. 30mm blockHeight This is the thickness of the shelf. 5mm holeDiameter Diameter of the tool holes. 10mm numberOfHoles The number of tools holes. This will determine the width of the shelf. 5 numberOfInserts The number of wall inserts to attach to shelf. 2 insertDistance The distance between the inserts in units of the horizontal spacing of hexagons in the honeycomb grid. 2 holeDistance Distance from the back of the shelf to the tool holes. 20mm holeSpacing The width between the holes on the shelf. 25mm edgeSpacing The width from an end hole to the edge of the shelf. 10mm minkowskyVal Advanced value. Affects the rounding of the edges. Default tends to be the best. 2 Printing Typical parameters you use for you HSW components should work. I print on PLA but you should use whatever material your wall is made of I suspect.