About this 3D model

The 3xMBox is a large, fully 3D printable transport system designed for tabletop gamers who want a durable & modular solution for carrying their miniature armies safely to the battlefield. Product video: https://youtu.be/gGobIJYrtOY Assembly animation: https://youtu.be/qXeKnDo5ZR0 Dimensions Outer dimension (xyz): 645 x 199 x 241 mm Inner dimension per box (xyz): 198 x 189 x 221 mm Min. bed size required: 218 x 233 mm The set consists of three individual storage boxes that securely slide into each other to form one solid transport unit. No glue, screws, or additional hardware are required during assembly. Even the reinforced corner protectors — the external exoskeleton — simply clip into place, making the entire build process clean, modular, and easy to maintain. Damaged parts can easily be reprinted and replaced, while the modular system allows you to customize and expand your setup whenever your collection grows. Use it as a compact 2-Box configuration for smaller armies or expand it into the full 3-Box configuration when transporting larger forces for tournaments and game nights. Miniature Trays Inside the boxes, multiple miniature trays can be inserted and swapped depending on your army composition. The compatible tray systems are listed below, allowing you to choose the perfect configuration for infantry, cavalry, monsters, vehicles, or large centerpiece models. The following base sizes will fit in the base sliders miniature trays: Round: 25, 28, 32, 40, 50, 60, 65, 100 mm Malifaux: 30, 40, 50 mm Shatterwars: 40, 50mm Square: 20, 25, 30, 40, 50 mm The amount of miniatures that can be stored depends on the base size and how close the models are pushed together, but varies between 3-7 per row. With the tray for 32mm bases, for example, up to 5 miniatures fit in each row that result in a total 20 models per tray. Also there are 3 types of mag trays available, so you can store multiple miniatures with magnets on it. Tray frame for metal plate (195 x 175mm) Tray for metal foils (195 x 175mm) Tray for magnets (5x2mm and 3x2mm holes) Assembly and printing tipps No glue, No screws needed. In case you want to use the mag trays, an optional metal plate/foils (195 x 175mm) or magnets (5x2mm -or- 3x2mm) are required. The handles and handle adapter should be printed with 3-4 perimeters and 30-50% infill as those items need to be strong enough.