About this 3D model

? Shark Flexi ? - 3 walls, 15% gyroid or 3D honeycomb infill, no supports - Tested down to 60% scale and up to 180% Editing 3MF - The 3mf models are split to parts. All the parts are located in the object list on the side panel. It is best not to color the objects manually using the fill tool and instead assign color to them from the object list to make the edges look cleaner. If a part you wish to color isn't on the object list, then you can use the fill tool to color it. Do not split to objects. - The eye shine Objects can be selected and deleted from the object list - Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing. Strawberry Clicker- I included a simple guide on the clickers within the zip!- Clicker Switches are required for the clickers to functionIt is not required to clip the prongs off the switch base to use them, however they are sharp, so I recommend it. Please clip them away from your face or use eye protection.⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐ I do not use AI in ANY part of my design process. All of my designs are human made™ ✌️++?This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on patreon - Click here ?