About this 3D model

I designed this wall mount for a HT DN50 pipe to have enough space to the wall to fit a 100 mm Blast-Gate. The mount goes on the bushing side of the pipe. If you want to mount on the pipe diameter i also uploaded a thicker clamp(Schelle_HT_DN50_Rohr.stl). I used two standard M4 Threaded Inserts from CNC Kitchen(https://www.printables.com/model/482734-threaded-inserts-heat-set-inserts-by-cnc-kitchen) in the main body. The clamp is screwed on with two DIN 912 M4x16 screws Filament: extrudr greentec pro (PETG should also be fine) Print settings: orientation: see picture layer height: 0.2 wall loops: 6 Top/bottom layers: 5 infill: 30% gyroid support: no