About this 3D model

Simple mounting collar for an E3D hotend to a basic Delta effector. This extends out the side and allows the mounting of a Berd-Air Cooling tube for part cooling. There are slots to add nuts for the bolts to attach the opposite side. You'll need a couple of other parts to complete the mount: 2 - 3x14mm or 3x16mm bolts 2 - 3mm hex nuts or square nuts Berd-Air Cooling tube *Optional but HIGHLY recommended: V6 Silicon Sock. Print instructions Shouldn't require any supports. Print out of a 'mechanical' filament (PETG, ASA, Nylon, etc). Print External Perimeters to internal to preserve tolerances. DO NOT OVER-TIGHTEN THE CLAMP ON TO THE TUBE! You will crush it.