About this 3D model

Hi! This is another robot/mecha/walker ready to print in parts then assembled. Choose your favourite colour combo and print!! Using the same pilot that i made for 'Tow Walker' Tolerances set around 0.2 mms so you shouldn't need sanding. If some parts comes loose when assembling my best tip is using a bit of tape (see below) to made a strong fit. I could print at 50% (in 5 hours) and it works!! Include a full-plate.stl with all the parts ready to print-in-place (fits in a 18x18 cms plate). Also there's 2 files 'full-color1.stl and full-color2.stl with the parts i've print in diferent colors NO SUPPORTS NEEDED!!! :D Hope you like it. Have fun!!