About this 3D model

Created using HueForge. If you resize, do not resize Z height, otherwise layer change settings will be incorrect. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ IIID Max Red Transmission Distance: 5.5 PLA+ IIID Max White Transmission Distance: 7 Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #10 (0.88mm) swap to White for the rest.