About this 3D model

UPDATE: 2/1/25 Thanks to some feedback, I was able to fix the random orange layer in a few of the profiles. As the user suggested, this is what was causing failed prints from the handy. With the new profile, I printed directly from the handy and it completed no problem. So give it a try again if this is what caused your print to fail. About adhesion: It's a flat object … I do not believe there is anything with the model or profile that would affect adhesion in anyway. Some suggestions to help with adhesion: Use a textured plate (PEI plate) Try bumping the head bed temperature Use 3DLAC or something similar to If all else fails, add a brim (When I do this, I use a brim-object gap of 0.3 to easily pull the brim away from the model) I also changed the 150% profiles from .12 to .2 layer height … not sure why I had it set that way, but it shaves a couple of hours off the print. I hope this helps, happy printing! --- I saw a multicolor of this great model posted on Reddit, and needed to print this. Unfortunately, the multicolor version by MrSaiclops only imported geometry into the Bambu Slicer. So I looked at the main photo, and manually “sliced” the layers by painting the colors. It was a pain, and took some time, but the finished product is incredible. The benefit of having this done is that you can make different color variations simply by re-assigning colors to the numbers. I am including 4 different .3mf files. The original, an upscaled 150% version, a 4-color version, and a 150% upscaled 4 color version. The reason for including additional files for the 150% upscaled version is because when I upscaled, it introduced artifacts in the model of color #1 (which isn't used at all), which I then had to “re-paint” away. The colors assigned to the 3 color version are 4, 7, and 10. The colors assigned to the 4 color version are 3, 4, 7, and 10. When importing, you should just be able to click the drop down for these colors and select your own. I printed a “small” version first at .2mm layer height, and a 150% version second at .12mm layer height. Both looked great. --Caveat-- This is probably not perfect, I screwed up lots when making it, but it slices correctly to the colors assigned, and it prints great. I have no pictures of the 4 color versions yet, because I haven't printed them yet … just prepared them. Model Link on Printables: https://www.printables.com/model/449898-great-wave-off-kanagawa-bambu-x1c-ams Original: https://www.thingiverse.com/thing:4446451 Remixed From: https://www.printables.com/model/69183-great-wave-off-kanagawa