About this 3D model

Edit. v2.0 : Added Optional printable Hour and Minute hands. A Glow in the dark or UV light Sensitive Luminous wall clock! Halloween Edition. You will need to purchase additional clock apparatus. Here are the links to what I've purchased : https://www.amazon.com/Mudder-Silence-Movement-Maximum-Thickness/dp/B01LXWJFPW This one comes with hanging hook and extra hands for customization : https://www.amazon.com/Mechanism-Mechanisms-Mattery-Replacement-Movement/dp/B09Q11KHBX Instructions : This is a large print : 235 x 235 Make sure you wash your build plate with soap water and use glue stick/ liquid glue before printing. The adhesion will need to be on point. If you have and X1C, the print will overlap with your calibration lines. Either manually remove the lines just before the print (pause if you have to) or let tit print over and scrap it off later. It will not affect performance and will not be seen. This will be a 4 color print. Black → Orange → Yellow → White You can choose the Orange, Yellow and White to be either Glow in the dark, Fluorescent(UV/ Neon) or normal Swap Instructions: Start with Black At layer #8 (1.08mm) swap to Orange Fluorescent At layer #18 (2.28mm) swap to Yellow Fluorescent At layer #20 (2.52mm) swap to White for the rest I have used : https://us.store.bambulab.com/products/pla-basic-filament Bambu PLA Basic Black PolyLite Luminous Orange PolyLite Luminous Yellow JAYO Meta White Looking forward to seeing your prints