About this 3D model

Here is my little branching Fox HueForge Print. Layerheight is at 0.08 mm with the standart 0,4mm Nozzle. The first Layer goes with 0,16mm in Total, 5 Colors where used. mine where PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Red Transmission Distance: 1.5 PLA PolyLite White Transmission Distance: 5 PLA PolyLite Orange Transmission Distance: 7.5 PLA PolyLite Yellow Transmission Distance: 11 PLA PolyLite White Transmission Distance: 5 Feel free, to use your very own colors and suprise us with your creativity. The Fillamentchanges whare as follows Start with Charcoal Black At layer #7 (0.64mm) swap to Red At layer #9 (0.8mm) swap to White At layer #10 (0.88mm) swap to Orange At layer #13 (1.12mm) swap to Yellow At layer #19 (1.6mm) swap to White for the rest.