About this 3D model

A cute way to store all your mail/napkins! My gf asked me to make her a mail holder that “wasn't ugly like the ones on amazon”. She really likes sanrio characters so I made her one based off Kuromi, but somehow she ended up using it as a napkin holder instead. Printing The model was printed in PLA using a BambuLab X1C with an AMS to manage the 3 colors. The colors used were: Polyterra Cotton White Inland Black Cookiecad Pale Pink swatch samples of the colors used Printed with: BambuLabs Cold Plate that came with the printer Glue Stick: Yes (if cold plate) Support: Not needed Walls: 2 Brims: No Nozzle: 0.4mm Layer Height: 0.2mm Infill: 10% Gyroid Top/Bottom Shell Layers: 5 This was to prevent the black infill from showing through and ensure that the top/bottom surfaces printed final finish was smooth, as I only used a 10% infill. I guess you only really need 5 layers on the bottom though, the top can go back to the default of 3 Print order: outer/inner/infill - Since this is a mostly flat piece with no overhangs, I printed it outer first to give it the best dimensional accuracy with least variations on the outer surface Time: 2h 52m Assembly Print all the parts, then press-fit the connector into the slots on the 2 faces Tips Printing the faces with the multi-colored part faceing the plate like the 3mf file comes with is recommended, as it gives you a smoother finish for the face The connector should press-fit into the faces, but if you want some extra security, you can add some super glue into the holes before pressing them in