About this 3D model

The original design has been extended, and certain details have been modified to facilitate support-free printing, eliminating the need for metal components . If desired, a small amount of adhesive can be applied to the baseplate. The original work has been lengthened, and some details have been modified to make it easier to print without support.No metal parts required .If necessary, apply some glue to the plate. 2024/3/19: A blade has been introduced, modeled after the Microtech knife design. It can be directly substituted for the original blade. The tip of the knife is sharp; please exercise caution. A blade has been added, made according to Microtech knife type. Can directly replace the original blade.The tip of the knife is sharp, please pay attention to safety. 2024/3/31: Many users have expressed a desire for shorter styles. I have re-uploaded the 75cm version. Many people want short styles. I re-uploaded the 75cm version. 2024/4/7: I have crafted a comb variant. I made a comb version. The hilt has been redesigned to incorporate lanyard holes, and non-manifold errors have been rectified. Reworked the hilt with lanyard holes and fixed non-manifold bugs. The pin set dimensions have been slightly increased and are included in the source file as ‘pin set V2.stl.’ If it remains too loose, a small amount of adhesive can be applied. Increase the size of pin set and put it in the ‘pin set V2.stl’ in the source file. If it is still too loose, you can use some glue.