About this 3D model

This is the latest iteration of my favorite underwater camera handle. I made the two big slots on the sole to make handle mounting even easier. To match the rod endpoint diameters with the Dinkum FlexiJoint pieces (30 mm) I have shortened the global length to 238 mm so now it fits a 200x200 mm build plate if you turn the model 45° in Z. To assemble the handle you will need: ## In the sole 2 pcs 1/4-20 UNC threaded insert (I have used one of these - the holes are 8 mm in diameter so basically all threaded insert would work, just heat them up with a soldering iron and push them in) 2 pcs rods with 1/4 UNC screws on both sides (I strongly suggest Dinkum FlexiJoint - just buy a pair from the cheapest one) 1 pc UNC 1/4" camera screw ## In the rods 2 pcs 1/4" UNC nuts 2 pcs 1/4" UNC bolts (>=18 mm in length)