About this 3D model

I have updated this to now include a customisable vial holder, so you can generate whatever you need. Calculating the Length and Width The length and width of the holder depend on three things: The vial diameter (how wide each vial is). The number of columns and rows (how many vials fit in each direction). The gap between each vial and the outer walls of the holder. Let's use the example from the script: a vial diameter of 23mm, 4 columns, and a 2.4mm gap. For the length (number of columns): You need to account for the width of all the vials and all the gaps. The total width of the vials is: (Number of Columns × Vial Diameter) Example: 4 columns × 23mm = 92mm The total width of the gaps is: (Number of Gaps × Gap Spacing) There is a 2.4mm gap between each vial, so for 4 columns, there are 3 gaps between them. There's also a 2.4mm gap on both the left and right outer sides. Total gaps: 3 (between) + 2 (outer) = 5 gaps Total gap width: 5 gaps × 2.4mm = 12mm Total Length: 92mm (vials) + 12mm (gaps) = 104mm For the width (number of rows): You'd use the same logic. For 2 rows, there is 1 gap between them and 2 outer gaps. Total gaps: 1 (between) +2 (outer) = 3 gaps Total width of the vials: 2 rows × 23mm = 46mm Total gap width: 3 gaps × 2.4mm = 7.2mm Total Width: 46mm (vials) + 7.2mm (gaps) = 53.2mm