About this 3D model
The "Happy Halloween LED Lamp" is a vibrant and festive 3D model that encapsulates the lively spirit of Halloween. This model cleverly combines the joy of decorative lighting with the spooky charm of Halloween. It features intricately designed cutouts and patterns, showcasing traditional Halloween elements like pumpkins, bats, ghosts, and more. The LED lamp within illuminates these designs brilliantly, creating a captivating visual effect that sets the perfect Halloween mood. This lamp is a wonderful addition to your Halloween decor, providing a playful and delightful ambiance to celebrate this thrilling occasion. If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign! WARNING! - remove purge line at the beginning of the print, it may interfere, specially with bigger prints! Materials and tools: - glue gun - aluminum tape - led strip (here is the one I use ): simple 1m white led USB - soldering iron (optional) RECOMMENDATIONS - use a textured PEI sheet - remove purge line at the beginning of the print! - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer - use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% to 25% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color How to make a hole in Bambu Studio: Assembly video: How to print without AMS: