About this 3D model

Charizard Card Keychain (Hueforge) The shown image has a clear coat of epoxy on it, but it is a beautiful print! I used a .2mm nozzle, but .4mm will work if you scale everything up! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA PolyLite Azure Blue Transmission Distance: 3 PLA PolyLite Orange Transmission Distance: 7.5 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Azure Blue At layer #12 (1.04mm) swap to Orange At layer #13 (1.12mm) swap to Scarlet Red At layer #17 (1.44mm) swap to Yellow for the rest.