About this 3D model

Summary This design is a fishing float. It can be printed in one part without support. I only use a brim to make sure the part doesn't detach from the bed during printing. 3 outer layer with a slight overextrusion (+2%) make for good waterproof parts. 0% infill is doable but i use 10% for mechanical resistance. I use the full scale model and a 75% scale version for smaller lines. 100% scale floats work with 5 to 9g 75% scale floats work with 1 to 2.5g (plain water, not salt water) Nail polish works well to put some color on it. Boost Me If you feel like it you can boost this model. If will help others to discover it and give me some credit to buy filament.