About this 3D model

Here is a lttle Balrog Card, i whiped up as a Hueforge. it should be 75x100 mm tall. As usual with hueforge, here is how to change the fillaments: Swap Instructions: Start with Charcoal Black At layer #11 (0.56mm) swap to Red At layer #14 (0.68mm) swap to Orange At layer #22 (1mm) swap to Yellow At layer #36 (1.56mm) swap to White for the rest. Fillaments i used for the Print: Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Red Transmission Distance: 1.5 PLA PolyLite Orange Transmission Distance: 7.5 PLA PolyLite Yellow Transmission Distance: 11 PLA PolyLite White Transmission Distance: 5 Have fun printing