About this 3D model

This is a design loosely based on the Halloween wall clock by TanyaAkinora. I loved that clock so much I decided to do a few of my own and share them after a year in my collection. I have yet to print this but I designed this with the Palette 2S 4 in 1 splicer in mind. Once I get my results dialed in, I'll take some updated photos and then take it out of WIP phase. If you decide to try it out, give me a shout if something needs fixing. I used these clock parts the last time and kept this in mind. https://www.amazon.com/gp/product/B07TMKHNMY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I did add a couple of pendulums that I've worked on as well if you choose a pendulum clock. I don't know yet if the Santa sleigh one is too much weight on one side over the other. I tried to balance it but I am hoping to have this all tested soon. EDIT: 12/6/20 While slicing this, I noticed a few floating issues and resolved them before I started printing. According to the slicer, this should be a 7 hour print and I'm hoping to have picture results tomorrow morning. 12/7/20 A reasonable success, but not good enough. Made some tweaks to increase definition of snowflakes and nose. 12/7/20 A much better success, but still nowhere near good enough. A few more tweaks and a longer purge block from black to white and I hope to have a good product. Changed parts were added. Print Settings Printer Brand: Creality Rafts: No Supports: No Resolution: 0.12 Infill: 15% Filament: Various PLA Blue, White, Black, Orange Category: Decor