About this 3D model

This is a hueforge print that utilises filament swapping at different layer heights. An AMS is not necessary, but will be very helpful. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Filaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA Sunlu Lilac Transmission Distance: 6.6 PLA Sunlu Beige Transmission Distance: 8.2 PLA Kingroon White Transmission Distance: 8 Swap Instructions: Start with Black At layer #7 (0.68mm) swap to Lilac At layer #10 (0.92mm) swap to Beige At layer #16 (1.4mm) swap to White for the rest.