About this 3D model

I was asked to design a Christmas ornament candy dish. This is what I came up with. It came out way better than I ever thought it would have. It prints very well even without supports! I am even filling them with candy canes and other candies to give out as gifts and people love them. UPDATE 1/3/26 : I have finally put up my own profile for this model. Print Settings: ORNAMENT - 3 Walls, 7% Gyroid Infill, .2mm layer for .4mm nozzle, .4mm for .8mm nozzle. For the best top, select “Not Applied” for Only one wall on top surfaces Change order of walls to outer/inner CROWN, CLIP and HOOK - .4mm nozzle at .2mm layer height Prints great with PLA and PETG No supports needed Assemble: Put the crown on first Squeeze the clip together and put it through the holes of the crown. Then snap the small part of the hook onto the clip thats in the crown. Tips: Here is a link to a video on how to put the clip in the crown. https://youtu.be/YZ0CGAVf-5E If the clip breaks, then print it last and take it right off the print bed as soon as it finishes and squeeze it or you can use a heat gun. Thank you to @Dadof6 for this video showing them being printed: https://www.instagram.com/p/CXKngN9FMS8/