About this 3D model

San Antonio Spurs Logo (02-17) - Hueforge Printing instructions: No MMU or AMS required, but AMS makes it much easier. Print at 100% infill Layer height: 0.08 First Layer Height 0.16 Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA+ eSun Silver Transmission Distance: 3 PLA Sunlu White Transmission Distance: 4 Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Silver At layer #17 (1.44mm) swap to White for the rest. Go Spurs Go!