About this 3D model

Here is a very parametric and ✨ Configured ✨ Gridfinity Base Grid and Bin from Fusion 360 file with 3MF's. I'll keep adding and updating as we develop new items. 14 Oct 2023 All F3D and 3MF files are now to Gridfinity spec. Reduced Grid Base Material needs – Shorter Z height, smaller magnet areas Included options for Bins Mag = Magnets - much faster and less material use to print without magnet holes. BF = Bin Fillet - easier to get your SOLID = Solid Bin so you can modify to your liking This is an actually parametric Grid and Bin model generator Parametric Fusion 360 Upload and open F3D file in Fusion 360 (free) and then open parameters. Modify > Change Parameters. Edit any field and watch it update. Sometimes things will break, so scale back your change and see if it works that way. Key Parameter Fields: GridX : Number of Cells in X (Base Grid) GridY : Number of Cells in Y (Base Grid) GridXY : Grid Internal Cell Size in MM. 42mm is standard. affects Grid Bases and Bin sizing. BinTall : Height in MM BinWide : Unit of GridXY (cell size) BinDeep : Unit of GridXY (cell size) Bins 1x1 will cause a warning but shouldn't affect the model. Parameters in Fusion 360 (red lines are key parameters to change for customizations. Grids Types NESTABLE GRID BASES - Simply mirror in slicer to get the other sides. Change the [Side] GridOffset to 0mm for nestable sides on the Grid Bases. Pre-made 3MF are named as such: -0S – Nestable Grid -2S – Has two adjacent thickened outer walls and two nestable (mirror one way to get other side) -4S – All four outer walls are "outside walls" Configured options in Fusion 360 The CONFIGURED-V10.f3z file now has configured options to make it easier to change common features that are tricky otherwise. See our video on the new Configurations feature . Print Settings PLA - 8-10% infill, Support Cubic. No support or Brim is Needed. 0.2mm Layer Height Our Favorite Things for 3D Printing Includes Affiliate Links Nano Adhesive - Stop using glue sticks - this is 1000% better ? 6mm Magnets - fits magnet holes in Plastic Debur Knife - clean up plastic edges (brims) Assembly Glue Known Problems The pattern feature will throw an error if the Bin is not more than 1x1. It shouldn't affect anything, however. See notes in parameters for known limits See our products