About this 3D model

Designed to hold all tools necessary for everyday printing and also most maintenance. The tool holder is also easily removed to move out of the way for special needs. There are Support arms for the MK3 and MK2S or the MK2.5 The support arms for the MK3 have not been tested as I have the 2.5 and found distances from the frame to other points were hard to find and I am not sure how accurate the ones I did manage to come with are. However, it is a very simple process to change the dimensions for the MK3 support arms should it be necessary. If you try the MK3 arms please let me know if any adjustments are necessary. They will be posted within minutes. The holder has spaces for Side Cutter, Oil, De-burring tool, Tweezers, 8 hex Bits and a space in the center for the driver, 4 allens, 3 allen wrenches, 17/13 spanner wrench, nozzle wrench, wire brush, Screws, spare nozzles, alcohol swabs and cleaning patches, and slots for up to 15 SD cards. Any feedback is appreciated as I am new to 3D printing and expecially to the CAD design. This was created using Fusion 360.