About this 3D model

Mid century inspired table lamp. Apart from the printed parts you will also need an e14 socket and cable. It should snap together, but for a more stable lamp I recommend gluing it if you're using the split version. Printing: Frame: If your printer can print 40cm high you can print the one piece frame, otherwise you should print the separated frame, 4 x separated side and 4 x pin. Shade: Print in vase mode. You can also make this yourself in a more traditional way, and in that case this lamp can be printed with 20cm of Z height. Holder: Give it a solid brim or print it upside down with supports. Ring: Easy print. Tube: Print upside down with a brim.