About this 3D model

Here is the full set of 6U drawers. I have also included a reduced filament hex model which is the one I have personally verified. It still fits with Walter's system, its just taller! Unfortunately I primarily use ABS so experienced extreme warping even with glue and sticking the build-plate down with Kapton tape, so I would advise against using this material. I used the original handles, scaled in XY by 120% and it seemed to be a nice press fit, however I still bungled one of them. I will continue to iterate on this design for a while; I have a few more adaptations of the shell and drawers if anyone is interested as well. Printing recommendations: PLA or PETG Back on the build-plate 0.16mm layers 15-20% cubic infill Infill combination ON Normal supports at 45deg My print settings (Which I don't recommend): eSun ABS+ White and Bambu Lab ASA Blue 0.16mm layers 20% cubic infill Infil combination ON Normal supports at 45deg 5mm brim; Object gap 0.1mm