About this 3D model

Time to get a little froggy on the race track! Meet the Froggy Derby Car and its fearless pilot, the Fly Driver. Together they weave through cones at lightning speed in a mad dash to the finish line ? Assembly InformationDerby Car parts are printed by object and require some easy assembly. I know print by object sometimes requires some extra work but we couldn't have this awesome model any other way! Much of the car fits snuggly together, but in some areas you may want to use a small amount of super glue, such as for the seat, steering wheel, eyes, and tailpipes. I have found that the wheels, axles, handles, and spoiler snap in securely and do not usually require glue, although results may vary depending on your printer settings and filament as well as who is going to be playing with it. Printing Instructions and 3MF InformationThere are so many different combinations of plates that I tinkered with try to get just the right setup, but honestly I think you will be the one to decide what works best for your colors choices, time, and printer availability. Downloading this file does not give you legal rights to sell this printed model and may not distribute the file in any way. If you wish to obtain a commercial license, then you can acquire one with a membership to our PatreonDerby Car Printing Instructions ??️Assembly Video 2 plates = approximately 2 hours Multiple plate arrangements are included for flexibility. Preferred Print Setup (use 3mf labeled "Optimal") Plate 1: Derby Car Body, Spoiler, Wheels, and NumberPlate 2: All Remaining Parts & Traffic ConesPlate 3: Fly DriverOptional Setup Use 3mf labeled ALL Parts and choose your own!Fly Driver Printing Instructions ?The Fly Driver will add a bit to the total print time since it is a print-in-place model. If you have the extra time, you may want to consider using the Optional Plate 2 setup from the ALL Plates File. ? Note: This model, along with all of my designs, is not intended for children under 3 years old. It contains small parts that may present a choking hazard. Adult supervision is recommended whenever children are handling or playing with these objects. Bambu Studio Printer Settings: Coloring: ?The 3mf includes pre-painted objects that are colored by parts as well as the painting tools. Feel free to change color presets and adjust colors as needed.Check final results in the slice preview before printing! Print Settings: ?️ 3 Walls and 10-15% Gyroid infill (the 3mf includes these settings)0.16-0.2 layer heightMake sure to keep brim 0.3 outer-only on the axles and tailpipes to aid in adhesion.I didn't do any scale testing (let me know if you do!)