About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Protopasta Soda Green Transmission Distance: 16 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 Swap Instructions: Start with Charcoal Black At layer #8 (0.72mm) swap to Soda Green At layer #11 (0.96mm) swap to Brown At layer #15 (1.28mm) swap to Yellow for the rest.