About this 3D model

This is a collection of Día de Muertos (Day of the Dead) themed keychains / key tags. At 100% size, all keychains have four layers of the same heights, with total height of 2.8mm. All keychain holes have an outside diameter is 8mm and an inside diameter is 4mm. The widths of the keychain holes' rings are 2mm, and the heights are 1.4mm high. Enabling ironing on top surfaces for best results. Layer heights There are four (4) layers of the following height (from bottom to top): Layer 1 - 1.4mm high, layers 0.0mm to 1.4mm Layer 2 - 0.6mm high, layers after 1.4mm to 2.0mm Layer 3 - 0.4mm high, layers after 2.0mm to 2.4mm Layer 4 - 0.4mm high, layers after 2.4mm to 2.8mm Printing All three (3) keychain / key tags pictured above were all printed with a 4.0mm nozzle, ironing all top surfaces, 1.0mm layer height, 25% infill, PETG filaments, and the following color changes: Layer 1 - base color Layer 2 - color change at layer height of 1.5mm Layer 3 - color change at layer height of 2.1mm Layer 4 - color change at layer height of 2.5mm