About this 3D model

From the new Bethesda game ‘Starfield’ Credsticks are the universal currency in game. Only requires a tiny amount of glue to stick the fascia onto the case, or if you choose, you can glue to covers together to create a single credstick without the need of the case. The rear snaps together without the need of screws or a filament hinge. I worked hard to create a prop that I hope fans of the game enjoy and can print within half a day. Recommended print settings… -I recommend following the .3mf file and keeping whats set there, however the cover plate would be much better printed using a 0.2mm nozzle, however if using a 0.4mm nozzle - i highly recommend dropping the outer and inner wall line width to between 25-30mm. -If using silk, specifically the gold, as you may know from experience its best to print silk slowly and hot to achieve a high metallic effect. Another thing to add would be that it's better not to add any ironing. Although iron creates a smooth top, it will remove any gloss effect from the silk. I hear about annealing an ironed surface using heat to try restore the gloss, but I haven't been successful with this, perhaps other might. Ironing can be used on the case section for a brilliant smooth surface. glue the 4 locators into the case notches and then glue the cover fascias onto the case. Very simple, I use mitre bond often, but you can use whatever sticks well, even heated filament I know some people like to use. when clipping the lid onto the base, line the two hinges together and with slight pressure push together while as parallel as possible. I have had no strength issues using 2 walls, the hinges and latch have been very strong and everything clicked together beautifully using Sunlu pla for the green. The silk gold was Ziro silk pla. I tested the case using just silk, it seems far to fragile using silk, printed with a 220 hotend and at 80mm for the speed, definately require a strong filament for the body section (plate 2) Unfortunately, these credsticks hold no actual value other then being awesome, enjoy.