About this 3D model

This design was made just for demonstration, this mini-lathe was not made to machine any type of material. The Lathe Chuck used in this project was made by bobwomble, the link to download it is this one: https://www.thingiverse.com/thing:624625 Approximately 700g of filament was spent for all the pieces, I used PLA for printing and a 0.6mm nozzle with 0.4mm of layer height. You must print this quantity of parts: 1 x Base Carro Orientável1 x Cabeçote1 x Carro Orientável3 x Manipulo4 x Base Guia Linear1 x Base Longitudinal1 x Carro Transversal1 x Carro Longitudinal1 x Castelinho Superior1 x Castelinho Inferior Based on my project, I also used these other materials: 8 608ZZ Ball Bearings12 LM8UU22 M8 Nuts Threaded Rod M8: 1 Piece with 450mm1 Piece with 250mm1 Piece with 200mm Linear guide 8mm: 2 Pieces with 400mm2 Pieces with 190mm2 Pieces with 120mm 1 Hex Bolt M8x202 Hex Bolts M8x60, 1 for Castelinho and the other for lathe chuck.8 Allen Bolts M5x308 Allen Bolts M3x163 Allen Bolts M3x5012 M3 Nuts My youtube channel: https://www.youtube.com/c/NicolasExposito1 Assembling: https://www.youtube.com/watch?v=1O6DiLc_5wg