About this 3D model

Cable reel out of an old Sunlu spool, max capacity is about 15m. BOM (Affiliate links) 1xSunlu filament spool, inner diameter 72,5mm aliExpress amazon.de 2x608 bearings aliExpress amazon.de 1xM8x50 bolt 1xM8 washer 1xM8 captive Nut 6xM4 inserts aliExpress amazon.de 4xM4x15 countersunk screws aliExpress amazon.de 1xM4 wing or knob screw for the brake (optional) 1xM3 insert aliExpress amazon.de 1xM3 washer 1xM3x15 screw 1xsocket amazon.de 1xcable tie two choices for the socket: PCE socket (untested part, designed after datasheet) https://www.hornbach.de/p/cee-schutzkontaktsteckdose-pce-16a-ip54-3-polig-blau/5196491/ you will also need 4xM4 screws and nuts for this one unknown round socket out of an quite old orange metal power strip (the one on the pictures) You can print everything without support, except the base. The base is work in progress, I think it uses to much filament to print, but it needs to be quite sturdy.