About this 3D model

BENEFITS printer is more stable and less vibrations bigger z stepper motor or lower the motor to gain 20+mm more space for a bigger psu/mcu fan could be used with or without TPU parts PARTS PLA/PETG 3-4 perimeters, 20-30 infill. The heavier it is, the more stable the printer is. No supports needed if you print in current orientation (with holes on a vertical wall - see bellow). foot_normal.stl - you can print a set of 4 foot_cables.stl - If you route your cables on back-right profile TPU/FLEX 3-4 perimeters, 20-30 infill depends on your TPU flexibility. No supports needed if you print in current orientation (with the tip up - see bellow). base_normal.stl - you can print a set of 4 base_cables.stl - If you route your cables on back-right profile BOM - for one foot 2 x M5x20mm Hex Socket Head Screws 2 x M5 t-nuts Disadvantage: you will need to relocate the display - but this could be a very fun side project :)