About this 3D model

The previously made "JEC-07" and "JEC-07-1" are models of fans used for the first stage of fan.https://www.myminifactory.com/object/3d-print-jet-engine-component-fan-75172https://www.myminifactory.com/object/3d-print-jet-engine-component-fan-metal-blade-with-snubber-91505This model is the partial model of "Pin/Rivet" type fan rotor used for 2nd or more stages of fan or front stage of low pressure compressor. I made it to compare these features.Parts of this model;① Fan Blade - all metal and pin/rivet type Made of titanium is common.② Fan Disc - Pin/Rivet Type③ Pin④ Rivet - flared after assembling. In this model, the screw is used to be possible to disassemble and assemble. Download files includes;-files: STL Files= 5 items STL file name: "ws" of last 2 digits means "With Support" which special designed.Purchase Parts Information;-Screws, M2x25 - as the tool Assembly Points- Not necessary special skill. - All blades should be assembled simultaneously. Total Net Print Time: Approx. 8 HR- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support) Note: When at actual print, each parameter may be adjusted by your experience. 3D printing settingsRaft, Layer Height, Infill: Depending on your experience.My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA. I do hope you enjoy making!!