About this 3D model

Use my print profile for best results, I cannot guarantee print profiles by others. Here's a 5x7" print for framing of Harley Quinn. It's very thin so you'll want to mount it (or add some thickness). It's printed with the following settings as a HueForge print using 5 colors on 2 AMS'es. You can also manually create stops and change filaments if you don't have the AMS. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Use 100% Fill (Rectilinear) Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Marine Blue Transmission Distance: 2 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Matte Ivory White Transmission Distance: 4 Set Swap Stops at: Start with Charcoal At layer #8 (0.44mm) swap to Marine Blue At layer #16 (0.76mm) swap to Scarlet Red At layer #30 (1.32mm) swap to Lemon Yellow At layer #36 (1.56mm) swap to Ivory White for the rest