About this 3D model

This is a design by me, transformed into a filamentpainting using Hueforge. If you scale it, dot change the height of the image You don't need a AMS to print this, but it makes it alot easier Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Red Transmission Distance: 6 PLA+ IIID Max Yellow Transmission Distance: 8.5 Swap Instructions: Start with Black At layer #6 (0.64mm) swap to Grey At layer #9 (0.88mm) swap to Red At layer #12 (1.12mm) swap to Yellow for the rest.