About this 3D model

https://www.youtube.com/watch?v=1mjLYIl42cgIn this project we’ll show you how to build a light up prop using Adafruit’s prop-maker! This is fully 3D printed and has a collapsible blade. It’s made from segments that are tapered so it can retract. It makes a pretty cool effect when you swing it around. DIY Electronics & PropsAll of the electronics are housed inside the 3D printed hilt. It’s also got an accelerometer for motion activated sound effects. It plays different sounds for swings and hits. They’re also randomized and feel pretty responsive to your motion. The blade is removable and the hilt makes a pretty sweet flashlight. Inside the emitter is an insanely bright 3W RGB LED. Latest Parts ListAdafruit Feather M4 https://adafru.it/3857Adafruit Prop-Maker FeatherWing https://adafru.it/39883W RGB LED https://adafru.it/25302200mAh battery https://adafru.it/1781Mini oval speaker https://adafru.it/3923Mini panel mounted toggle switch https://adafru.it/32214-pin JST PH cable (socket) https://www.adafruit.com/product/40454-pin JST PH cable (male) https://www.adafruit.com/product/39552-pin JST PH extension cable https://www.adafruit.com/product/1131Header kit for Feathers https://www.adafruit.com/product/2886 Tutorial Learn Guidehttps://learn.adafruit.com/prop-maker-light-wand/ Code on githubhttps://github.com/adafruit/Adafruit_Learning_System_Guides Designed to fit John Mulac's @3dprintingworld collapsing bladehttps://www.thingiverse.com/thing:3606120/fileshttps://www.thingiverse.com/3DPRINTINGWORLD